dmesg - Intel Core i7-8550U
microcode: microcode updated early to revision 0xca, date = 2019-10-03
Linux version 5.3.0-42-generic (buildd@lcy01-amd64-026) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #34-Ubuntu SMP Fri Feb 28 05:49:40 UTC 2020 (Ubuntu 5.3.0-42.34-generic 5.3.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000002cbb0fff] usable
BIOS-e820: [mem 0x000000002cbb1000-0x000000002cbb1fff] ACPI NVS
BIOS-e820: [mem 0x000000002cbb2000-0x000000002cbb2fff] reserved
BIOS-e820: [mem 0x000000002cbb3000-0x000000003dc47fff] usable
BIOS-e820: [mem 0x000000003dc48000-0x000000003e005fff] reserved
BIOS-e820: [mem 0x000000003e006000-0x000000003e052fff] ACPI data
BIOS-e820: [mem 0x000000003e053000-0x000000003e70afff] ACPI NVS
BIOS-e820: [mem 0x000000003e70b000-0x000000003ff26fff] reserved
BIOS-e820: [mem 0x000000003ff27000-0x000000003fffefff] type 20
BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000002ae7fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x3e016000 ACPI 2.0=0x3e016000 SMBIOS=0x3fe08000 SMBIOS 3.0=0x3fe07000 TPMFinalLog=0x3e3ac000 ESRT=0x3fdd9018 MPS=0xfcd30 MEMATTR=0x3b14f018
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 3.0.0 present.
DMI: Dell Inc. XPS 13 9370/0H0VG3, BIOS 1.10.0 04/18/2019
tsc: Detected 2000.000 MHz processor
tsc: Detected 1999.968 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x2ae800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0060000000 mask 7FE0000000 uncachable
2 base 0050000000 mask 7FF0000000 uncachable
3 base 004C000000 mask 7FFC000000 uncachable
4 base 004B000000 mask 7FFF000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x48e00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcfc0-0x000fcfcf]
esrt: Reserving ESRT space from 0x000000003fdd9018 to 0x000000003fdd9050.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x1e801000, 0x1e801fff] PGTABLE
BRK [0x1e802000, 0x1e802fff] PGTABLE
BRK [0x1e803000, 0x1e803fff] PGTABLE
BRK [0x1e804000, 0x1e804fff] PGTABLE
BRK [0x1e805000, 0x1e805fff] PGTABLE
BRK [0x1e806000, 0x1e806fff] PGTABLE
BRK [0x1e807000, 0x1e807fff] PGTABLE
BRK [0x1e808000, 0x1e808fff] PGTABLE
RAMDISK: [mem 0x219fa000-0x247aafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003E016000 000024 (v02 DELL )
ACPI: XSDT 0x000000003E0160C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x000000003E03C9D8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x000000003E016260 026773 (v02 DELL CBX3 01072009 INTL 20160422)
ACPI: FACS 0x000000003E708180 000040
ACPI: APIC 0x000000003E03CAE8 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x000000003E03CBA8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x000000003E03CBF0 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x000000003E03CCA0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x000000003E03CCE0 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
ACPI: SSDT 0x000000003E03CD18 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: BOOT 0x000000003E03D078 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SSDT 0x000000003E03D0A0 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: HPET 0x000000003E03E380 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000003E03E3B8 000CEF (v02 INTEL xh_rvp07 00000000 INTL 20160422)
ACPI: UEFI 0x000000003E03F0A8 000042 (v01 00000000 00000000)
ACPI: SSDT 0x000000003E03F0F0 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000003E0408A0 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000003E040938 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000003E040AA0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000003E040D40 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000003E043D48 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000003E044260 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000003E044298 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: SSDT 0x000000003E0442F0 000801 (v02 INTEL UsbCTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000003E044AF8 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
ACPI: MSDM 0x000000003E051AC0 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: SLIC 0x000000003E051B18 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: NHLT 0x000000003E051C90 00002D (v00 INTEL EDK2 00000002 01000013)
ACPI: BGRT 0x000000003E051CC0 000038 (v00 \xf3\xee 01072009 AMI 00010013)
ACPI: TPM2 0x000000003E051CF8 000034 (v03 DELL CBX3 00000001 AMI 00000000)
ACPI: ASF! 0x000000003E051D30 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: DMAR 0x000000003E051DD0 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000002ae7fffff]
NODE_DATA(0) allocated [mem 0x2ae7d4000-0x2ae7fefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000002ae7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000002cbb0fff]
node 0: [mem 0x000000002cbb3000-0x000000003dc47fff]
node 0: [mem 0x000000003ffff000-0x000000003fffffff]
node 0: [mem 0x0000000048000000-0x0000000048dfffff]
node 0: [mem 0x0000000100000000-0x00000002ae7fffff]
Zeroed struct page in unavailable ranges: 38428 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000002ae7fffff]
On node 0 totalpages: 2019812
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 3946 pages used for memmap
DMA32 zone: 252487 pages, LIFO batch:63
Normal zone: 27552 pages used for memmap
Normal zone: 1763328 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0x39e1a000-0x39e36fff] usable ==> reserved
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x2cbb1000-0x2cbb1fff]
PM: Registered nosave memory: [mem 0x2cbb2000-0x2cbb2fff]
PM: Registered nosave memory: [mem 0x39e1a000-0x39e36fff]
PM: Registered nosave memory: [mem 0x3dc48000-0x3e005fff]
PM: Registered nosave memory: [mem 0x3e006000-0x3e052fff]
PM: Registered nosave memory: [mem 0x3e053000-0x3e70afff]
PM: Registered nosave memory: [mem 0x3e70b000-0x3ff26fff]
PM: Registered nosave memory: [mem 0x3ff27000-0x3fffefff]
PM: Registered nosave memory: [mem 0x40000000-0x47ffffff]
PM: Registered nosave memory: [mem 0x48e00000-0x4f7fffff]
PM: Registered nosave memory: [mem 0x4f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x4f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 1988225
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7743056K/8079248K available (14339K kernel code, 2387K rwdata, 4724K rodata, 2676K init, 5044K bss, 336192K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 43572 entries in 171 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000003dd21000 end: 0x0000003dd40fff
DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.93 BogoMIPS (lpj=7999872)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (31999.48 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x2cbb1000-0x2cbb1fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x3e053000-0x3e70afff] (7045120 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 17:42:32, date: 2020-03-24
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1585071752.036:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x47 set to 0x80
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91B4E4A70000 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91B4E46FBC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91B4E4A6BCC0 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91B4E4A76800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91B4E4AC3000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91B4E46F9800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91B4E4670C00 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit]
pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit]
pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff]
pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff]
pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
pci 0000:6e:00.0: [144d:a804] type 00 class 0x010802
pci 0000:6e:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 6e]
pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x2cbb1000-0x2fffffff]
e820: reserve RAM buffer [mem 0x39e1a000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3dc48000-0x3fffffff]
e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
e820: reserve RAM buffer [mem 0x2ae800000-0x2afffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL07e6 PNP0f13 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 1000
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 6e]
pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x4f800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 1 [mem 0xdc300000-0xdc3fffff]
pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc1fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
pci_bus 0000:6e: resource 1 [mem 0xdc200000-0xdc2fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 46788K
DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x35e1a000-0x39e1a000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x50000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x8E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
battery: ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-42-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-42-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core INT33A1:00: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x806ea, pf=0x80, revision=0xca
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (552950542, 329304)->(563749520, -10469674)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b0178a448cdf317ec351a9bbacbf1aca2acf00eb'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:273:745
rtc_cmos 00:01: setting system clock to 2020-03-24T17:42:33 UTC (1585071753)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2676K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1420K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
hidraw: raw HID events driver (C) Jiri Kosina
wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
nvme nvme0: pci function 0000:6e:00.0
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
i2c_hid i2c-DELL07E6:00: i2c-DELL07E6:00 supply vdd not found, using dummy regulator
i2c_hid i2c-DELL07E6:00: i2c-DELL07E6:00 supply vddl not found, using dummy regulator
usb 1-5: new high-speed USB device number 2 using xhci_hcd
usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-5: Product: Integrated_Webcam_HD
usb 1-5: Manufacturer: CN0FFMHCLOG00822B79PA01
usb 1-5: SerialNumber: 200901010001
nvme nvme0: 7/0/0 default/read/poll queues
nvme0n1: p1 p2
input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0001/input/input7
input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0001/input/input8
hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
usb 1-7: new full-speed USB device number 3 using xhci_hcd
usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2, bcdDevice= 0.01
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 1991.991 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d40afd3d, max_idle_ns: 881590607686 ns
clocksource: Switched to clocksource tsc
usb 1-10: new full-speed USB device number 4 using xhci_hcd
usb 1-10: New USB device found, idVendor=27c6, idProduct=5385, bcdDevice= 1.00
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: Goodix Fingerprint Device
usb 1-10: Manufacturer: HTMicroelectronics
usb 1-10: SerialNumber: HTK32
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
input: Intel HID events as /devices/platform/INT33D5:00/input/input10
intel-hid INT33D5:00: platform supports 5 button array
input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input11
idma64 idma64.0: Found Intel integrated DMA 64-bit
idma64 idma64.1: Found Intel integrated DMA 64-bit
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
cdc_acm 1-10:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
cryptd: max_cpu_qlen set to 1000
cfg80211: Loading compiled-in X.509 certificates for regulatory database
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
mc: Linux media interface: v0.10
input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12
usbcore: registered new interface driver btusb
Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
videodev: Linux video capture interface: v2.00
systemd-journald[334]: Received request to flush runtime journal from PID 1
Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
checking generic (50000000 7f0000) vs hw (50000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0001/input/input16
ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00140-QCARMSWPZ-1 api 6 features wowlan,ignore-otp,mfp crc32 29eb8ca1
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 4ed3569e
audit: type=1400 audit(1585071755.650:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=654 comm="apparmor_parser"
audit: type=1400 audit(1585071755.650:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=656 comm="apparmor_parser"
audit: type=1400 audit(1585071755.654:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1585071755.654:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1585071755.654:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1585071755.654:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=660 comm="apparmor_parser"
audit: type=1400 audit(1585071755.654:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=658 comm="apparmor_parser"
audit: type=1400 audit(1585071755.654:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=657 comm="apparmor_parser"
audit: type=1400 audit(1585071755.658:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=653 comm="apparmor_parser"
ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
ath10k_pci 0000:02:00.0: htt-ver 3.60 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
wlp2s0: authenticate with d8:6c:63:df:fc:f5
wlp2s0: send auth to d8:6c:63:df:fc:f5 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with d8:6c:63:df:fc:f5 (try 1/3)
wlp2s0: RX AssocResp from d8:6c:63:df:fc:f5 (capab=0x1011 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:6c:63:df:fc:f5
pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400
pci 0000:04:01.0: enabling Extended Tags
pci 0000:04:01.0: supports D1 D2
pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400
pci 0000:04:02.0: enabling Extended Tags
pci 0000:04:02.0: supports D1 D2
pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400
pci 0000:04:04.0: enabling Extended Tags
pci 0000:04:04.0: supports D1 D2
pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-6d]
pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
pci 0000:05:00.0: [8086:15d2] type 00 class 0x088000
pci 0000:05:00.0: reg 0x10: [mem 0xda000000-0xda03ffff]
pci 0000:05:00.0: reg 0x14: [mem 0xda040000-0xda040fff]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:04:01.0: PCI bridge to [bus 06-38]
pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330
pci 0000:39:00.0: reg 0x10: [mem 0xc3f00000-0xc3f0ffff]
pci 0000:39:00.0: enabling Extended Tags
pci 0000:39:00.0: supports D1 D2
pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:04:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
pci 0000:04:02.0: PCI bridge to [bus 39]
pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
pci_bus 0000:04: Allocating resources
pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 4000
pci 0000:03:00.0: BAR 13: no space for [io size 0x4000]
pci 0000:03:00.0: BAR 13: failed to assign [io size 0x4000]
pci 0000:03:00.0: BAR 13: no space for [io size 0x4000]
pci 0000:03:00.0: BAR 13: failed to assign [io size 0x4000]
pci 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:04:01.0: BAR 13: no space for [io size 0x1000]
pci 0000:04:01.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:04:02.0: BAR 13: no space for [io size 0x1000]
pci 0000:04:02.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:04:04.0: BAR 13: no space for [io size 0x1000]
pci 0000:04:04.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:04:04.0: BAR 13: no space for [io size 0x1000]
pci 0000:04:04.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:04:02.0: BAR 13: no space for [io size 0x1000]
pci 0000:04:02.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:04:01.0: BAR 13: no space for [io size 0x1000]
pci 0000:04:01.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:04:01.0: PCI bridge to [bus 06-38]
pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
pci 0000:04:02.0: PCI bridge to [bus 39]
pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04-6d]
pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
xhci_hcd 0000:39:00.0: xHCI Host Controller
xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.3.0-42-generic xhci-hcd
usb usb3: SerialNumber: 0000:39:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:39:00.0: xHCI Host Controller
xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.3.0-42-generic xhci-hcd
usb usb4: SerialNumber: 0000:39:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
pci_bus 0000:04: Allocating resources
pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 4000
pcieport 0000:03:00.0: BAR 13: no space for [io size 0x4000]
pcieport 0000:03:00.0: BAR 13: failed to assign [io size 0x4000]
pcieport 0000:03:00.0: BAR 13: no space for [io size 0x4000]
pcieport 0000:03:00.0: BAR 13: failed to assign [io size 0x4000]
pcieport 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:04:01.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:01.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:02.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:02.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:04.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:04.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:04.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:04.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:04:02.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:02.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:01.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:01.0: BAR 13: failed to assign [io size 0x1000]
psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5
psmouse serio1: Failed to enable mouse on isa0060/serio1
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
psmouse serio1: Failed to enable mouse on isa0060/serio1
xhci_hcd 0000:39:00.0: Refused to change power state, currently in D3
xhci_hcd 0000:39:00.0: Refused to change power state, currently in D3
xhci_hcd 0000:39:00.0: Controller not ready at resume -19
xhci_hcd 0000:39:00.0: PCI post-resume error -19!
xhci_hcd 0000:39:00.0: HC died; cleaning up
xhci_hcd 0000:39:00.0: remove, state 4
usb usb4: USB disconnect, device number 1
xhci_hcd 0000:39:00.0: USB bus 4 deregistered
xhci_hcd 0000:39:00.0: remove, state 4
usb usb3: USB disconnect, device number 1
xhci_hcd 0000:39:00.0: Host halt failed, -19
xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
xhci_hcd 0000:39:00.0: USB bus 3 deregistered
pci_bus 0000:04: Allocating resources
pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 4000
pcieport 0000:03:00.0: BAR 13: no space for [io size 0x4000]
pcieport 0000:03:00.0: BAR 13: failed to assign [io size 0x4000]
pcieport 0000:03:00.0: BAR 13: no space for [io size 0x4000]
pcieport 0000:03:00.0: BAR 13: failed to assign [io size 0x4000]
pcieport 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:04:01.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:01.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:02.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:02.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:04.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:04.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:04.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:04.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:04:02.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:02.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:01.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:04:01.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:04:00.0: Refused to change power state, currently in D3
pci_bus 0000:05: busn_res: [bus 05] is released
pci_bus 0000:06: busn_res: [bus 06-38] is released
pci_bus 0000:39: busn_res: [bus 39] is released
pci_bus 0000:3a: busn_res: [bus 3a-6d] is released
pci_bus 0000:04: busn_res: [bus 04-6d] is released
perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3155 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
perf: interrupt took too long (3945 > 3943), lowering kernel.perf_event_max_sample_rate to 50500
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: avx2x4 gen() 37442 MB/s
raid6: avx2x4 xor() 23708 MB/s
raid6: avx2x2 gen() 34788 MB/s
raid6: avx2x2 xor() 21958 MB/s
raid6: avx2x1 gen() 28595 MB/s
raid6: avx2x1 xor() 20216 MB/s
raid6: sse2x4 gen() 16538 MB/s
raid6: sse2x4 xor() 10415 MB/s
raid6: sse2x2 gen() 14160 MB/s
raid6: sse2x2 xor() 9535 MB/s
raid6: sse2x1 gen() 12630 MB/s
raid6: sse2x1 xor() 7217 MB/s
raid6: using algorithm avx2x4 gen() 37442 MB/s
raid6: .... xor() 23708 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
perf: interrupt took too long (4933 > 4931), lowering kernel.perf_event_max_sample_rate to 40500
mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU0: Core temperature/speed normal
mce: CPU4: Core temperature/speed normal
mce: CPU7: Package temperature/speed normal
mce: CPU5: Package temperature/speed normal
mce: CPU6: Package temperature/speed normal
mce: CPU2: Package temperature/speed normal
mce: CPU1: Package temperature/speed normal
mce: CPU3: Package temperature/speed normal
mce: CPU4: Package temperature/speed normal
mce: CPU0: Package temperature/speed normal